Sealing strips have good waterproof and durability, can prevent dust, and have good insulation and sealing effects. They are also crucial for installation. Let's take a look together with the editor below

1. The rubber sealing strip should not be pulled too tightly, and the cutting length should be 20-30mm longer than the assembly length. When installing, it should be embedded in place, with a flat surface and close contact with the glass and glass groove, so that the force around the glass is evenly distributed. At the corner, the rubber strip should be cut off with a sloping surface and firmly bonded with adhesive at the break.

2. When using sealant to fill and fix glass, first use rubber strips or rubber blocks to squeeze the glass, leaving a gap for glue injection. Note that the glue depth should not be less than 5mm. Before the glue solidifies, the glass should be kept free from vibration.

3. The installation location of woolen strips is generally on the window (door) sash, the surrounding area of the frame sash, or on the sealing bridge (air blocking block) to enhance the frame. Sealing between fans.